Karakteristik Reologi Komposit Serbuk Cangkang Kemiri dan Poliuretan

Yovial Mahyoedin, Kurnia Harlina Dewi, Wenny Marthiana, Rizky Arman, Ridho Azhari

Abstract


Abstrak

Penelitian ini bertujuan menentukan karakteristik reologi komposit serbuk cangkang kemiri (SCK) berukuran 45µm<d<75µm dan resin Poliuretan (PU) dengan komposisi bervariasi, yaitu 5%:95%, 10%:90%, 15%:85%. Pencampuran SCK dan PU dilakukan dengan mechanical mixer dengan kecepatan dan lama pengadukan masing-masing 10, 15 dan 20 menit dan 100, 200 dan 250 rpm. Reologi komposit diperoleh dengan pengujian rotational viscometer dan dioptimasi dengan metoda Taguchi. Penelitian menunjukkan viskositas terkecil 218,66 mPa.s, ditemukan pada komposit dengan komposisi 5% 95%, waktu pengadukan 15 menit dan kecepatan pengadukan 100 rpm.

 

Kata kunci: Serbuk cangkang kemiri, Poliuretan, Viskositas, Reologi.

 

 

Abstract

 

This study aimed to determine the composite rheological characteristics of candlenut shells (SCK) with particle size of 45µm <d <75µm and polyurethane (PU) resins with varying compositions, namely 5%: 95%, 10%: 90%, 15%: 85%. Mixing of SCK and PU is carried out using mechanical mixers with a speed and stirring time of 10, 15 and 20 minutes and 100, 200 and 250 rpm, respectively. Composite rheology was obtained by rotational viscometer testing and optimized by the Taguchi method. The results showed the smallest viscosity of 218.66 mPa.s, found in composites with a composition of 5% 95%, stirring time of 15 minutes and stirring speed of 100 rpm.

 

Keywords: candlenut shell, polyurethane, viscosity, rheology

Full Text:

PDF

References


http://www.sumbarprov.go.id/details/news/6376.

Cheremisinoff, P. Nicholas. 1989. Handbook of Polymer Science and Technology, Vol.2.

Stevens, P. Malcolm P. 1998. Polymer Chemistry: An Introduction, 3rd Ed. Oxford University Press.

Satguru, R., Mac Mahon, I., Padget, J.C., Coogan, R.C. 1994 Journal of Coatings Technology, 66(830), 55.

Wang, T.-L.D., Lyman, D.J. 1993. Journal of Polymer Science Part A: Polymer Chemistry, 31, 1983.

Talbert. 2008. Paint Technology Handbook. Taylor & Francis Group, LLC, Boca Raton.

Kendall K., Stainton C., 2001, Adhesion and aggregation of fine particles, PowderTechnol., 121, 223-229.

Montgomery Douglas C. 2012. Design and Analysis of Experiments. 8th Ed. Willey Publisher.

Mahyoedin Y., Jaafar S., Norhamidi M., Andanastuti M., Suryadimal. 2018. Effect of graphite sizes and carbon black content on flowability of the injection molded conductive. MATEC Web of Conferences vol. 248.

Mahyoedin Y., Jaafar S., Norhamidi M., Andanastuti M., Iqbal. 2018. Peculiarity of Injection Molding Composites. MATEC Web of Conferences vol. 248

Saidah, A., Susilowati, S.E. and Nofendri, Y., 2018. PENGARUH FRAKSI VOLUME SERAT TERHADAP KEKUATAN MEKANIK KOMPOSIT SERAT JERAMI PADI EPOXY DAN SERAT JERAMI PADI RESIN YUKALAC 157. Jurnal Konversi Energi dan Manufaktur UNJ, 5(2), pp.96-101.




DOI: https://doi.org/10.52447/jktm.v4i1.1466

Refbacks

  • There are currently no refbacks.